Serving the Athens area  ·  (706) 715-4130  ·  Open Mon-Sun 7am-7pm
📞 (706) 715-4130 Free Quote

Metal Roofing in Athens, GA (30601) · Local Professionals

Athens Metal Roofing · Fast response in Athens and the Athens area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+276Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Athens is a city of tree-lined streets and old roofs. From the Victorian porches of Cobbham to the brick ranches off Milledge Avenue, the housing stock here is old, varied, and takes a beating from Georgia weather. We know these roofs because we work on them every week.

Athens Metal Roofing is based right here in 30601, and we serve homeowners and property managers across Athens-Clarke County and the surrounding areas. Whether you are near the Boulevard historic district or out toward Watkinsville, we understand the local conditions that wear roofs down: summer storms, winter ice, and the constant drop of limbs from white oaks and loblolly pines.

Metal Roofing in Athens (30601)

Athens sits on rolling Piedmont hills with stiff red clay underfoot, and that clay matters for roofing. It holds water after storms, which can back up against foundations and make proper roof drainage critical. The tree canopy is beautiful but tough on roofs: white oaks, willow oaks, and pines drop branches in every thunderstorm, and kudzu edges creep in from the county lines. Older homes in the Boulevard and Cobbham historic districts often have steep pitches and complex rooflines that require careful flashing and custom panel work. Craftsman bungalows in Normaltown and Five Points have deep eaves that can hide rotten fascia, and the 1950s-70s brick ranches along Milledge Avenue often have low-slope roofs that need specific metal systems to shed water properly.

Our team has installed, repaired, and replaced metal roofs on every kind of Athens home: from antebellum Greek Revival mansions to modern subdivision houses out in Oconee and Oglethorpe counties. We know how to handle the tight lot access in historic neighborhoods, the permit requirements that vary by jurisdiction, and the design review that comes with historic districts and HOAs.

Our services in Athens

How a Job Works in Athens

Step 1: You call us at (706) 715-4130 or request a free estimate online. We schedule an on-site assessment at your convenience, and we inspect your roof, attic, and flashing. We will give you a written estimate and talk through options, whether that is a repair, a replacement, or a metal roof over your existing shingles.

Step 2: Once you approve the scope, we pull the required permits through the local building department and coordinate any HOA or historic district approvals. On the work date, our crew arrives with materials and protects your landscaping. Tight lots in Five Points or Normaltown mean we plan for material staging and dumpster placement in advance. We keep you informed at every step.

Step 3: After installation, we clean the site thoroughly, haul away all debris, and walk the roof with you to make sure you are satisfied. We leave your property clean and your new roof ready for the next Athens storm.

Metal roofing in Athens is priced by the square foot, and the final cost depends on the material, roof complexity, access, and condition of the existing roof. For a typical asphalt shingle tear-off and metal roof replacement, most homeowners in 30601 see prices starting around $9 per square foot. Standing seam metal roofing starts at $10 per square foot, and metal roof over shingles (retrofit) starts at $7 per square foot. Smaller jobs like metal roof repair or leak repair start at $450, and screw replacement or re-fastening starts at $750. We always provide a free estimate so you know exactly what to expect before any work begins. Call us at (706) 715-4130 to schedule yours.

My 1920s bungalow in Normaltown has a low-pitch roof and deep eaves. Can you install metal without changing the look?
Yes. We frequently work on Craftsman bungalows in Normaltown and Five Points. For low-pitch roofs, we often recommend a standing seam or corrugated panel system that sheds water well. We can match the profile and color to maintain the historic character, and we pay close attention to the deep eaves to ensure proper ventilation and flashing.
A storm just dropped a pine limb on my roof near Bishop Park. How fast can you respond?
We offer free inspections for storm and wind damage and prioritize emergency calls. Call us at (706) 715-4130, and we will schedule a prompt assessment. If there is an active leak, we can often provide temporary protection the same day and then schedule permanent repairs.
What does a metal roof replacement cost for a typical 1950s brick ranch in Beechwood?
For a standard ranch home around 1,800 to 2,200 square feet, a metal roof replacement typically starts around $9 per square foot, so you might expect a range of $16,000 to $20,000 depending on panel type, roof complexity, and whether we need to remove existing shingles. We provide a detailed free estimate after inspecting your roof.
Do I need a permit to replace my roof in Athens-Clarke County?
Yes, roofing permits are commonly required for a full replacement or re-roof, and requirements vary by jurisdiction. We handle the permit process for you and ensure the work meets local codes. For specific questions about permits and inspections, you can check the City of Athens website or call the building department.
My HOA requires approval for roof color. Can you help with that?
Absolutely. We work with many HOAs in Athens and surrounding subdivisions. We can provide color samples and documentation for your HOA submission, and we will coordinate the approval process before ordering materials. If your home is in a historic district, we will also help with design review requirements.
Are you fully insured for roofing work in Athens?
Yes, we are fully insured with general liability and workers' compensation coverage. We are happy to provide a certificate of insurance upon request so you can verify our coverage before any work begins.
What maintenance does a metal roof need in Athens's humid climate?
In Athens, the main issues are fallen limbs, pine needles, and occasional ice damming at the eaves. We recommend an annual inspection, especially after storm season, to clear debris and check fasteners and seals. We offer maintenance plans and can also apply a protective coating to extend the life of your metal roof.
Why choose us?

Trusted professionals in Athens

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Athens

All your work handled by qualified professionals in Athens

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

276+ Verified Client Reviews in Athens

⭐⭐⭐⭐⭐ 4.9/5 · 276 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Athens · Response within 24h · No commitment · ☎ (706) 715-4130

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Athens ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm