Serving the Athens area  ·  (706) 715-4130  ·  Open Mon-Sun 7am-7pm
📞 (706) 715-4130 Free Quote

Metal Roofing in Jefferson, GA (30549) · Local Professionals

Athens Metal Roofing · Fast response in Jefferson and the Athens area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
🎯 Get a Free Quote 📞 (706) 715-4130
+276Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Jefferson sits right where the Piedmont rolls into Jackson County, and its roofs tell that story block by block. Around the historic downtown square you have older homes with steep pitches and detailed trim, while the newer subdivisions off Highway 129 and the 30549 ZIP are full of architectural shingle roofs that are now hitting the age where replacement makes sense.

Homeowners call Athens Metal Roofing because we know how this area works: hot summers, violent afternoon storms, and pine limbs that find a way to land on a roof. Whether you are near Jefferson High School or out on a few acres toward Arcade, we give you a straight answer and a metal roof built for Georgia weather.

Metal Roofing in Jefferson (30549)

Jefferson is not flat, and the lots show it. Many properties around the downtown square and along Sycamore Street have tight side yards, mature oaks, and a grade that drops off toward the back, which means staging panels and getting equipment in takes planning. Out toward the 129 corridor and the newer subdivisions, lots are wider but the soil is that stiff red clay that holds water after a storm, so we pay attention to where runoff goes and how gutters discharge. Older homes near the historic district often have layered shingles and complex rooflines with dormers and porches, while the newer builds have simpler hips and valleys but low slopes that need careful flashing details.

We have worked throughout Jefferson and the surrounding Athens area, from the established streets near the Jefferson City Schools campus to rural properties off Highway 82 and 15. That mix of old and new means we carry the right panel profiles and trim for both: standing seam for the clean look on a newer home, corrugated or ribbed panels for a barn or outbuilding, and copper or specialty metal when a historic home calls for something that matches its era.

Our services in Jefferson

How a Job Works in Jefferson

Step 1: you call (706) 715-4130 or request an estimate, and we schedule a free on-site assessment. We walk the roof, check the decking, flashing, and fasteners, and talk through what you are seeing. You get a written scope and a clear price, not a pressure pitch.

Step 2: once you approve, we handle the permit with the City of Jefferson or Jackson County as required, and we coordinate with any HOA design review before ordering panels. On tight lots near downtown, we plan panel delivery and staging so we are not blocking your neighbor's driveway. The crew removes the old roof, inspects and repairs decking, and installs the new metal system with the correct underlayment and flashing.

Step 3: we clean the yard with a magnet sweep for nails, haul off all debris, and walk the finished roof with you. We do not leave until you have seen the details and know how the gutters and penetrations were handled.

Pricing in Jefferson depends on the roof, not just the square footage. As a ballpark, metal roof installation starts around $8 per square foot, standing seam around $10, metal roof replacement around $9, and a retrofit over existing shingles around $7. Repairs and leak calls start at $450, screw replacement and re-fastening at $750, and flashing or chimney work at $600. Stone-coated steel and metal shingle run about $9, while copper and specialty metal start around $20. Coating and painting start at $2.50 per square foot, and gutters for metal roofs run from $9 per linear foot. Access, roof pitch, decking condition, and how fast you need it done all move the number. Call (706) 715-4130 for a free estimate on your specific roof.

Do I need a different roof for an older home near the Jefferson historic downtown square?
Not necessarily, but the details matter. Older homes around the square often have complex rooflines, original decking, and sometimes multiple shingle layers. We look at the structure and the profile that fits the house, and if the home is in a design review area we help you pick a panel and color that will pass. Standing seam and metal shingle both work well on historic homes when the trim and flashing are done right.
How fast can you respond to storm damage in Jefferson?
We prioritize active leaks and storm damage. Call (706) 715-4130 and we will schedule an inspection, often the same week and sooner if water is coming into the house. We document what we find for your insurance file and make temporary repairs if needed before the permanent fix.
What does a typical metal roof replacement cost in Jefferson?
Most full replacements in the 30549 area fall in a range based on size and complexity. Metal roof replacement starts around $9 per square foot, and a retrofit over shingles starts around $7. A 2,000 square foot roof is a different job on a steep downtown lot than on a flat subdivision lot, so the free estimate is the only number that means anything.
Do I need a permit for a metal roof in Jefferson?
Yes, a full replacement or re-roof generally requires a permit, and the requirements vary between the City of Jefferson and Jackson County depending on where you are. We pull the permit and schedule the inspection as part of the job. If your home is in a historic district or an HOA, there may be design review on top of that, and we help you navigate it.
What if my neighbor says my new metal roof drains onto their property?
Property line and drainage questions come up, especially on tighter lots near downtown. We route gutters and downspouts to discharge on your property where possible, and we can talk through options if the grade makes that hard. If you are in an HOA, we also confirm the color and profile are approved before we order.
Are you insured for work on my Jefferson property?
Yes. We carry general liability insurance and workers' compensation coverage.
What maintenance does a metal roof need in Jefferson?
Not much, but a yearly look helps. After storm season, check for lifted panels, loose fasteners, and debris in valleys and gutters. Pine needles and oak leaves hold moisture, so keep them cleared. We offer inspections and can replace screws and re-fasten panels before a small issue becomes a leak.

Nearby service areas

📍 Athens 30601📍 Watkinsville 30609📍 Bogart 30622📍 Winterville 30683
Why choose us?

Trusted professionals in Athens

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Athens

All your work handled by qualified professionals in Athens

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

276+ Verified Client Reviews in Athens

⭐⭐⭐⭐⭐ 4.9/5 · 276 verified Google reviews

Emily C.
⭐⭐⭐⭐⭐
EC
Emily C.
Winterville

“We had a carport out in the country that needed a proper metal cover, and they retrofitted it right over the old shingles, about 600 square feet of standing seam. Crew of three knocked it out in a day and a half and hauled off every scrap. No more leaks dripping on the truck.”

Metal Roof Over Shingles (Retrofit)
Michelle B.
⭐⭐⭐⭐
MB
Michelle B.
Watkinsville

“Our back porch renovation was stalled because nobody wanted to touch the copper roof section over the terrace. Athens Metal Roofing re-flashed it and replaced two damaged copper panels, and it looks better than the rest of the house now. Took a little longer than quoted, but the craftsmanship is honestly beautiful.”

Copper & Specialty Metal Roofing
Rachel S.
⭐⭐⭐⭐⭐
RS
Rachel S.
Comer

“Our old barn on the farm was leaking every time it rained and I figured we'd have to tear the whole roof off. They repaired the rusted panels, replaced the screws, and added new flashing around the ridge, a fraction of what a full replacement would've cost. Barn's dry through two big storms since.”

Commercial & Agricultural Metal Roofing
Lisa H.
⭐⭐⭐⭐⭐
LH
Lisa H.
Bogart

“Impressed is an understatement. Standing seam on our 2,400 sq ft house, done in four days with a crew that cleaned up so well you couldn't tell they'd been here except for the gorgeous new roof.”

Standing Seam Metal Roofing
Chris A.
⭐⭐⭐⭐⭐
CA
Chris A.
Danielsville

“Had a leak near the ridge vents that two other outfits couldn't figure out. These guys found the flashing issue in twenty minutes, fixed it, and re-sealed the vent boots while they were up there. Grateful doesn't cover it, first dry spring in years.”

Metal Roof Repair
David L.
⭐⭐⭐⭐
DL
David L.
Good Hope

“Replaced our tired old metal roof with new ribbed panels in a dark bronze finish. They walked me through every option without any pressure and the price held exactly where they quoted it. Only gripe is the debris pile sat in the driveway an extra day, but the roof itself is flawless.”

Metal Roof Replacement
Scott H.
⭐⭐⭐⭐⭐
SH
Scott H.
Colbert

“We went with stone-coated steel to keep the neighborhood look, and I was surprised how much quieter it is than I expected. Whole job on our ranch house took about a week and the crew was respectful of our yard the entire time.”

Stone-Coated Steel Roofing
James P.
⭐⭐⭐⭐⭐
JP
James P.
Athens

“New metal roof on our house and I couldn't be happier, straight lines, tight seams, and they even re-hung the gutters to match the new panels. Showed up when they said they would, every single day.”

Metal Roof Installation
Free Quote

Get Your Free Quote

Metal Roofing in Athens · Response within 24h · No commitment · ☎ (706) 715-4130

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Athens ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm