Serving the Athens area  ·  (706) 715-4130  ·  Open Mon-Sun 7am-7pm
📞 (706) 715-4130 Free Quote

Metal Roofing in Winder, GA (30680) · Local Professionals

Athens Metal Roofing · Fast response in Winder and the Athens area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+276Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Winder sits right where Barrow County's older mill-town grid meets the fast-growing subdivisions off Highway 316, and the roofs here show it. One block you're looking at a 1950s brick ranch with a low-pitch shingle roof, the next a brand-new craftsman with architectural shingles, and out toward Fort Yargo the tree canopy is close enough to drop limbs on both.

Homeowners in 30680 call us because we know what Winder weather does to a roof. Summer thunderstorms roll across the Piedmont, straight-line wind peels panels and lifts shingles, and the humid heat works on fasteners and flashing year after year. We're based in Athens, we're fully insured, and we've been climbing Winder roofs long enough to know which neighborhoods need a repair and which ones are ready for a metal replacement.

Metal Roofing in Winder (30680)

Winder's terrain is rolling Piedmont, and the ground under a lot of these homes is stiff red clay that holds water after a storm. That matters for roofing more than people think. On older streets near downtown and around the Barrow County courthouse square, the lots are tight, the trees are mature, and gutters have to move a lot of water fast. Newer subdivisions off Highway 316 and out toward Bethlehem have steeper grades and HOA design rules that can limit panel profiles and colors, so we check those before we order material. Out on the farmland edges of Barrow County, barns and outbuildings often need corrugated panel work, and those roofs take a beating from limbs and sun.

Our team handles the full range here: standing seam, metal shingle, stone-coated steel, corrugated and ribbed panels, retrofits over existing shingles where code allows, plus repairs, leak calls, and fastening work. We pull the Winder permitting through the city or county as required, and we document storm damage for insurance claims without ever promising what a policy will pay.

Our services in Winder

How a Job Works in Winder

Step 1 is a free on-site assessment. You call (706) 715-4130, we schedule a time that works, and we get on the roof to look at the actual condition: fasteners, seams, flashing, decking, and attic ventilation. We give you a written estimate with the scope and the price before any work starts.

Step 2 is the work itself. In Winder that often means coordinating around tight driveways near downtown, HOA approval in the newer subdivisions, and permit timing with the city or county building department. We protect landscaping, stage material where it won't block neighbors, and keep the crew moving so your roof isn't open any longer than it has to be.

Step 3 is cleanup and a final walkthrough. We magnet-sweep for nails, haul off old material, and walk the finished roof with you so you can see the seams, flashing, and penetrations yourself. We leave your property clean, and we don't consider the job done until you've had a chance to ask questions.

Pricing in Winder depends on roof size, pitch, access, decking condition, and how urgent the job is. As a ballpark, metal roof installation starts around $8 per square foot, standing seam around $10, metal roof replacement around $9, and a retrofit over existing shingles around $7 where code allows it. Corrugated and ribbed panel roofing starts around $5.50 per square foot, and metal shingle or stone-coated steel around $9. Repairs and leak calls start around $450, screw replacement and re-fastening around $750, and flashing or chimney work around $600. Coating and painting starts around $2.50 per square foot, and gutters for metal roofs run from about $9 per linear foot. Storm and wind damage inspections are free. Call (706) 715-4130 for a free estimate specific to your Winder property.

My 1960s ranch near downtown Winder has a low-pitch shingle roof. Can metal go on it?
Often yes, but low-slope roofs need the right panel and underlayment, and sometimes a build-up to get proper drainage. We check the decking and slope first, then recommend standing seam or a panel rated for low pitch. We won't put a product on a roof where it will pond water.
A storm just took shingles off my roof in Winder. How fast can you get out?
Call (706) 715-4130 and we'll schedule a free storm and wind damage inspection as quickly as we can, usually within a day or two depending on how many calls are active after a system moves through. We tarp active leaks where possible and document everything for your insurance claim.
What does a typical metal roof replacement cost in 30680?
Most Winder replacements land somewhere between the low and high end of our published starting rates, which begin around $9 per square foot for replacement and $8 for new installation. Square footage, roof complexity, decking repairs, and panel choice move the number. We give a firm written estimate after the free inspection.
Do I need a permit for a metal roof in Winder?
Full replacements and re-roofs commonly require a permit, and the rules and fees vary between the City of Winder and Barrow County depending on where you are. We confirm the requirement with the local building department before work starts and handle the paperwork as part of the job.
My HOA has to approve the roof color. Can you help with that?
Yes. Several Winder subdivisions have design review, and we can provide panel profiles, color samples, and manufacturer specs for your HOA packet. We schedule around the approval timeline so material isn't sitting in your driveway waiting.
Are you insured for work on my Winder property?
We are fully insured, with general liability coverage and workers' compensation for our crew. We're happy to provide proof of insurance before we start, and we recommend asking any contractor for the same.
What maintenance does a metal roof need in Winder's climate?
The main things are fastener checks, clearing debris from valleys and gutters, and inspecting flashing around chimneys and skylights. The humid summers and storm season here make an annual inspection worthwhile, especially if you have oaks or pines close to the roof. We offer inspections and can re-fasten or replace screws as needed.
Why choose us?

Trusted professionals in Athens

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Athens

All your work handled by qualified professionals in Athens

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

276+ Verified Client Reviews in Athens

⭐⭐⭐⭐⭐ 4.9/5 · 276 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Athens · Response within 24h · No commitment · ☎ (706) 715-4130

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Athens ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm