Serving the Athens area  ·  (706) 715-4130  ·  Open Mon-Sun 7am-7pm
📞 (706) 715-4130 Free Quote

Metal Roofing in Colbert, GA (30628) · Local Professionals

Athens Metal Roofing · Fast response in Colbert and the Athens area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+276Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Colbert is a small town where the wind comes across open fields and hits farm sheds, barns, and older homes head-on, and that is exactly the kind of roof work we do every week. If you live off Highway 72 or down a gravel drive near Colbert Elementary, you know how fast a summer storm can peel back a panel or drop a pine limb through a roof.

Homeowners in 30628 call Athens Metal Roofing because we understand the mix here: metal roofs on outbuildings that need re-fastening, corrugated panels on sheds that take a beating, and house roofs that need a real repair rather than a patch. We are based in Athens and serve Colbert and the surrounding areas, and we are fully insured with general liability and workers' compensation.

Metal Roofing in Colbert (30628)

Colbert sits on rolling Piedmont land with stiff red clay underfoot, and that shapes how we work. Many properties here are larger lots with farm sheds, barns, and detached garages, often with corrugated or ribbed panel roofs that have been screwed down for years. The wind on open ground works those fasteners loose, and once a screw backs out, water gets in. We see a lot of failed washers, wallowed-out holes, and panels that have lifted at the edges after a straight-line wind event. On the house side, older homes and brick ranches often have low-slope sections or porch roofs where flashing and transitions matter more than the panel itself. Access can be tight on smaller in-town lots, and we plan for where we stage materials and how we get equipment to the roof without tearing up a yard.

Our team has worked metal roofs across Athens and the surrounding counties, from standing seam and metal shingle installations to straightforward repairs on corrugated panels. We know the difference between a repair that will hold and one that just gets you to next spring.

Our services in Colbert

How a Job Works in Colbert

Step 1: You call us at (706) 715-4130 or request a free estimate, and we set a time to come out. We walk the roof and the property, look at the panels, fasteners, flashing, and any signs of leaks or storm damage, and we give you a straight assessment with options and pricing. No pressure and no vague numbers.

Step 2: Once you approve the scope, we schedule the work. In Colbert that might mean coordinating with a homeowner who has a long gravel driveway or a property with a barn and a house to address. If a permit is required for a replacement or re-roof, we point you to the local building department and make sure the work is scoped to meet what they require. We protect landscaping, keep the site organized, and work around your schedule as much as we can.

Step 3: We clean up thoroughly, haul away old materials and debris, and do a final walkthrough with you. We make sure you know what was done and that the roof is watertight before we leave. We leave your property clean.

Pricing in Colbert depends on the job. For a metal roof repair, including leak repair, we start at $450. Screw replacement and re-fastening on a panel roof starts at $750. A full metal roof installation starts at $8 per square foot, standing seam starts at $10 per square foot, and metal roof replacement starts at $9 per square foot. If you are considering going over existing shingles, that retrofit starts at $7 per square foot. Corrugated and ribbed panel roofing starts at $5.50 per square foot, and metal shingle or stone-coated steel starts at $9 per square foot. Coating and painting starts at $2.50 per square foot. The main cost factors are roof size, pitch, access, condition of the existing roof, and how urgent the work is. Call us at (706) 715-4130 for a free estimate and a clear number.

My barn roof off Highway 72 has panels that lift in every storm. Can you fix that without replacing the whole roof?
Yes, that is a common call in Colbert. We inspect the fasteners, washers, and panel edges, replace failed screws, re-fasten lifted panels, and check the flashing and trim. If the panels are still sound, a re-fastening job starting at $750 can often solve the problem. If the panels are cracked or the holes are wallowed out, we will tell you honestly whether a repair will hold.
A storm just dropped a limb on my roof in Colbert. How fast can you get out?
Call us at (706) 715-4130 as soon as you can. We offer free storm and wind damage inspections, and we prioritize active leaks and storm damage. We will assess the damage, tarp or secure what needs it, and give you a repair plan. We cannot promise a specific arrival time, but we move quickly on emergencies in Colbert and the surrounding area.
What does a typical metal roof repair cost in Colbert?
Most repairs start at $450 for leak repair, and screw replacement or re-fastening starts at $750. The final price depends on roof size, how many panels are affected, access, and whether flashing or trim needs work. We give you a free estimate before any work begins so you know the number up front.
Do I need a permit for a metal roof replacement in Colbert?
Permit requirements vary by jurisdiction, and a full replacement or re-roof commonly requires one. We always recommend checking with the local building department before work starts, because thresholds, fees, and inspection requirements can differ. We can point you in the right direction and make sure the work is scoped to meet local requirements.
My neighbor says my new metal roof panels overhang the property line. What do I do?
Property line issues come up, and the best first step is to check your survey and talk with your neighbor. We build to the property lines and setbacks shown on your survey and follow local rules. If you are in an HOA, we can coordinate on panel profile and color approval before materials are ordered so there are no surprises.
Are you insured for work on my Colbert property?
Yes. We are fully insured with general liability and workers' compensation coverage. We are happy to provide proof of insurance before we start work on your property.
What should I do to maintain a metal roof in Colbert between storms?
Keep debris off the roof and out of the gutters, especially after pine straw and limb drop. Have the fasteners and washers checked every few years, particularly on corrugated panel roofs on sheds and barns, because loose screws are the most common cause of leaks. After a big storm, look for lifted panels or dented areas and call us for a free inspection if you see anything that concerns you.
Why choose us?

Trusted professionals in Athens

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Athens

All your work handled by qualified professionals in Athens

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

276+ Verified Client Reviews in Athens

⭐⭐⭐⭐⭐ 4.9/5 · 276 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Athens · Response within 24h · No commitment · ☎ (706) 715-4130

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Athens ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm